adding my printer's LAN IP Address to ZA Free
I have been having a problem with 9.2.044.000, but it is not the same as you. I'm adding the information about here since this thread is open.
Specifically whenever I try to manually "Check for product updates" by clicking on the "Check for Update" button under Preference a dialog box titled "Update Progress" appears but says "Error: Unable to connect to update server". Before that another dialog titled "Check for Update" appears very briefly saying "Connecting to http://update.zonelabs.com/checkupdate.asp:80 ..."
This use to work when I have version 9.1.007.002 installed.
Anyone else having this problem -- any solutions out there?
I'm consider downgrading to 9.2.042.000 to see if it works any better. That's the latest version mentioned on their Release History page...
Re: Since I installed ZoneAlarm Free I have been having problems p...
Sorry about my previous off-topic post...
Regarding your network printer problem. I have a similar issue long ago and solved it by adding my printer's LAN IP Address (192.168.0.4 in my case) to the Firewall | Zones list in the ZoneAlarm Control Panel. Note: For this to work I also had to set the printer up to always use this fixed IP address on the network (rather than dynamically assigning one via DHCP).
Hope that helps.