Results 1 to 9 of 9

Thread: [Solved] Juniper Network Connect SSL VPN and Zone Alarm

  1. #1
    mdlewis Guest

    Default [Solved] Juniper Network Connect SSL VPN and Zone Alarm

    With the new v8, had it working before but did a clean install so I don't remember what I did then, I seem to have to enable svchost.exe as a Server in both the Internet and Trusted Zones to allow access to resources over my Juniper Network Connect SSL VPN.
    Is this the best/only way to configure ZA to work with this VPN?
    Thanks.

    Operating System:Windows XP Pro
    Software Version:8.0
    Product Name:ZoneAlarm Internet Security Suite

  2. #2
    prof_fate Guest

    Default Re: Juniper Network Connect SSL VPN and Zone Alarm


  3. #3
    mdlewis Guest

    Default Re: Juniper Network Connect SSL VPN and Zone Alarm

    Thanks. That didn't seem to work but I have not yet rebooted and will play around a bit more. Interestingly I had everything working and then decide to reintialize my database, in hopes of clearing up the slow shutdown..didn't help, and the VPN related issue returned even with these changes, Generic Host as a server in the internet zone. It worked find in Learn Mode but switching to High locked me up. I suspect I will have to drop back to medium on the firewall.


  4. #4
    Join Date
    Jun 2006
    Location
    The 3rd Coast - South Central Texas
    Posts
    10,465

    Default Re: Juniper Network Connect SSL VPN and Zone Alarm


    <BLOCKQUOTE><HR>mdlewis wrote:
    Thanks. That didn't seem to work but I have not yet rebooted and will play around a bit more. Interestingly I had everything working and then decide to reintialize my database, in hopes of clearing up the slow shutdown..didn't help, and the VPN related issue returned even with these changes, Generic Host as a server in the internet zone. It worked find in Learn Mode but switching to High locked me up. I suspect I will have to drop back to medium on the firewall.
    <HR></BLOCKQUOTE>
    Your Correct..Click on ZA Firewall (Main Tab)Internet Zone Security should be HIGHTrusted Zone Security should be Mediumand on my three Desktop Computers, I have Everything Listed in the Firewall / ZONES set as Trustedas for the Generic Host, I the Following in Program Control, Program Tab..NOTE: Make sure all of the following Programs have Trusted and Internet access (2 Green Check Marks):a.) All Microsoft and Windows Programs have Green Check marks for Trusted and Internet Access..b.) Generic Host Process for win32 Services (svchost.exe) also allow Trusted Server Rights (no Internet Server Rights)c.) IE Crash Detectiond.) Internet Explorer or FireFoxe.) Malicious Software Removal Toolf.) True Vector Service (If it is listed)g.) Zone Alarm Clienth.) Zone Alarm Updating Clienti.) Your Email Client needs Trusted, Internet accessand Send Mail all need Green check Marks..I hope this helps you..--------------------------------------------------------
    My XP SP3 :
    ZoneAlarm Security Suite version:8.0.015.000
    TrueVector version:8.0.015.000
    Driver version:8.0.015.000
    Anti-virus engine version:6.0.2.678
    Anti-virus signature DAT file version:958818171
    Anti-spyware engine version:5.0.202.0
    Anti-spyware signature DAT file version:01.200809.4555
    AntiSpam version:5.0.61.9957
    GeorgeV
    ZoneAlarm® Extreme Security


    Click here for ZA Support
    Monday-Saturday__ 6am to 10pm Central time
    Closed Sundays and Holidays

  5. #5
    mdlewis Guest

    Default Re: Juniper Network Connect SSL VPN and Zone Alarm

    Not sure if this will be consistent but it is working now on Programs - Maximum when I allow svchost.exe to act as as server in the Internet Zone. The other settings on Juniper Network Connect (EXE and Service) are the defaults.

  6. #6
    presleyj Guest

    Default Re: Juniper Network Connect SSL VPN and Zone Alarm

    I tried everything listed here and I'm still not able to remote in to my machine at work through Juniper.
    This worked fine before I upgraded Security Suite to 8.0.
    Any other ideas?

  7. #7
    Join Date
    Jun 2006
    Location
    The 3rd Coast - South Central Texas
    Posts
    10,465

    Default Re: Juniper Network Connect SSL VPN and Zone Alarm

    Check ZA Program Control to see if some Configuration has changed..
    GeorgeV
    ZoneAlarm® Extreme Security


    Click here for ZA Support
    Monday-Saturday__ 6am to 10pm Central time
    Closed Sundays and Holidays

  8. #8
    presleyj Guest

    Default Re: Juniper Network Connect SSL VPN and Zone Alarm

    Good call!
    Well, it wasn't that something had changed, but I did check the program control list one more time and found something interesting.
    It was another Juniper related program, but it was the setup program, so at first I didn't think much of it.
    And it was set to &quot;ask&quot;, as opposed to &quot;block&quot;, so I figured it would ask me
    if it needed anything.
    It turns out that giving this program full access,
    in addition to
    the other Juniper program, fixed my problem.
    Thanks George!

  9. #9
    Join Date
    Jun 2006
    Location
    The 3rd Coast - South Central Texas
    Posts
    10,465

    Default Re: Juniper Network Connect SSL VPN and Zone Alarm

    Your Welcome..Thank you for your Feedback..
    GeorgeV
    ZoneAlarm® Extreme Security


    Click here for ZA Support
    Monday-Saturday__ 6am to 10pm Central time
    Closed Sundays and Holidays

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 1
    Last Post: January 13th, 2011, 08:07 PM
  2. Replies: 1
    Last Post: May 20th, 2010, 06:43 PM
  3. [SOLVED] Can't connect to my wireless network
    By saflakk in forum Access Issues
    Replies: 5
    Last Post: January 27th, 2010, 03:05 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •