Results 1 to 5 of 5

Thread: Stop error 50 -- "Srescan.sys" caused problem

  1. #1
    rick_f Guest

    Default Stop error 50 -- "Srescan.sys" caused problem

    A few months ago, I got a new DELL to replace my old Win98 machine (sure wish I'd stuck with the old one to be honest). I've been
    getting intermittent errors with driver problems (stop d1), but this morning I got a...
    <div align="center">
    &quot;stop 0x00000050 (0xF000A774, 0x00000000, 0xF7276355, 0X00000000)
    <div align="center">srescan.sys - address F7276355 base at F7270000 date stamp 459e1537<div align="center">Problem caused by 'srescan.sys' &quot;page_fault_in_non paged area&quot;<div align="center">
    I checked the file, 'srescan.sys' (location c:\windows\system32\zonelabs ant it's only 50K in size.
    Date of file is 1-5-2007
    I have a Dell Dimension Pentium 4 duo core, 1 gig memory, 250 gig HDD, WinXP Media Ctr SP-2, avast AV, with ZoneAlarm (free
    I searched for any mention of this error on the forum but don't see it mentioned anywhere.
    Any help in this matter would be appreciated.

  2. #2
    Join Date
    Dec 2005

    Default Re: Stop error 50 -- "Srescan.sys" caused problem


    The ZAfree version 7 has parts for the ZASS version 7.

    The srescan is not even needed. it can be safely removed.

    Take care.

    Best regards.

  3. #3
    rick_f Guest

    Default Re: Stop error 50 -- "Srescan.sys" caused problem

    Thanks Oldsod,
    After posting this BSOD error (Stop 50), I found the 'search' button at the bottom of the forum.
    I found the thread where others were having the same problem.
    I decided I'd try to remove 'srescan.sys' like the instructions here state:
    So far that's worked for me.
    Next step for me I guess would be to fall back to ver 6 if necessary.
    Thanks :8}

    Message Edited by Rick-F on 03-21-200703:40 PM

    Message Edited by Rick-F on 03-21-200703:41 PM

  4. #4
    Join Date
    Dec 2005

    Default Re: Stop error 50 -- "Srescan.sys" caused problem

    Hi Rick-F

    There is another trick. Download the latest ZAPro and install it. Turn off all the Privacy and the Spyscanner. Leave the OS Firewall off. Then wait for the trial to expire. The ZAFree is now ready for use and has no further issues.

    Best regards.

  5. #5
    rick_f Guest

    Default Re: Stop error 50 -- "Srescan.sys" caused problem

    Thanks Oldsod...
    For your suggestion.
    I think I'll stick with this one for now. I used ZAP for
    a few years... until I got zapped with a product
    upgrade that no longer worked on my old Win98 machine.
    Had to drop back to prior version (Ver 4.594 I think it was).

    Since I purchased a 2 yr license, I got burned for the second yr of use, but... ver 4 continued to work fine for me.
    I did like the cache cleaner that was built into ZAP though.
    Thanks for your help.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts