Results 1 to 10 of 17

Thread: Question about latest ZISS 7 update

Hybrid View

  1. #1
    hsel Guest

    Default Question about latest ZISS 7 update

    Heya,
    I was just curious if the issue concerning BSOD's after updating ZISS 7's antivirus/antispyware has been resolved. It may have been due to ATi drivers, but I thought that potential cause for the BSOD had been fixed earlier. So has it been fixed in the new rev? I'll make sure to clear out SpySweeper 5.5 before installing and perhaps System Mechanic 7 as well although I have the latest version of that so the install can proceed. (theoretically as I've had TrueVector issues.) My only issue with ZISS 7 were BSOD's with hard errors after I updated the antivirus/antispyware definitions. I'd be very appreciative if someone could tell me before I install it given the BSOD's. The only way to stop those were to uninstall in Safe Mode. I'd rather not go through that again. LOL
    Thanks!hselburn

    Operating System:Windows XP Pro
    Software Version:7.0
    Product Name:ZoneAlarm Internet Security Suite

  2. #2
    Join Date
    Nov 2004
    Location
    localhost
    Posts
    17,291

    Default Re: Question about latest ZISS 7 update

    Hi!I didn't have any BSOD after upgrading to 362. But this is really machine dependent. You will for sure read here about horror story on the upgrade (been a support forum) but the only way to know if it will work for you its to install it...Not sure why you still use SS and SM they have been reported to create problems with ZASS before and they add very little to the protection of ZASS 7. They can slow down the machine unnecessarily, create problems to clean out malware (fighting each other for resources and HD access). I would reccomend to remove them completely before upgarding to latest ZASS. Only after you see that ZASS works as it should you can install back (if you really need to)Also use the SS cleaner to remove SS. Since SS drivers may be difficult to remove. You can find it here:http://support.webroot.com/ics/suppo...asp?deptID=776Search (top left box) for 'sscleanup'After removing SS and SM, run a registry/system cleaner, ccleaner is good and FREE (http://www.ccleaner.com/download/downloadpage.aspx?f=3)Re-download the new installer from here (and do NOT use any download managers):http://www.zonelabs.com/zasuitedownload/ Install with default settings, do not alter them....Once rebooted manual update the antivirus/antispyware signature ('update now' under the antivirus/antispyware tab)After the update perform a full antivirus/antispyware scan.Cheers,FaxEDIT: spelling (sccleanup should read sscleanup)

    Message Edited by fax on 07-10-2007 06:38 AM

    Click here for ZA Support
    Monday-Saturday 6am to 10pm Central time
    Closed Sundays and Holidays

  3. #3
    hsel Guest

    Default Re: Question about latest ZISS 7 update

    Hi,
    I was using SpySweeper and SM7 as I was using ZASS 6.5 until I tried to install ZASS 7 and had the BSOD's. I could not reinstall ZASS 6.5 so I thought I'd keep the others around until I could get ZASS 7 up and running properly. I'll make sure I have the latest ATi drivers installed too. I know that the latest Catalyst driver is v7.6. One question though, is there a guide on how to set up the AntiSpyware/AntiVirus so I get the same protection? SM7 does other things (defragging memory and such), but SpySweeper is AntiSpyware/AntiVirus only and if I can
    get ZASS7 installed without the BSOD's after updating the antivirus defs, that would be really appreciated. The guide could be in a similar format to the forum posts about how to install/uninstall ZASS. (And I really appreciate how quickly you respond to my forum posts!)
    Thanks!hselburn

  4. #4
    Join Date
    Nov 2004
    Location
    localhost
    Posts
    17,291

    Default Re: Question about latest ZISS 7 update

    Hi!I don't think there is a manual of the perfect update/upgrade...In case of BSOD you should have contacted ZA technical support and troubleshoot the issue with them.Apart from what recommended before I can only suggest to follow also the manual uninstall instruction posted here to be sure you have removed all ZA left overs:http://forum.zonealarm.com/zonelabs/...hread.id=48347(from point 12 onwards)Cheers,Fax

    Click here for ZA Support
    Monday-Saturday 6am to 10pm Central time
    Closed Sundays and Holidays

  5. #5
    hsel Guest

    Default Re: Question about latest ZISS 7 update

    Actually, I did contact Tech Support and I will probably be emailing them again with an update. The guide idea was just a suggestion as it would help people who've been using other Antispyware apps to configure ZASS 7 and dump the other software.

    Thanks!hselburn

  6. #6
    Join Date
    Nov 2004
    Location
    localhost
    Posts
    17,291

    Default Re: Question about latest ZISS 7 update

    Hi!Software is always evolving... due to malware. Something good today may be bad tomorrow...Its a matter of slow adjustment by the user... I did learn myself that more software does not mean more protection, on the contrary it often means more trouble, conflicts and problems... You need however to choose the right software. Up to version 6.5 you really needed complementary tools to stay protected with version 7 you don't actually need them. Security tools are getting more and more complicated and instrusive and as a general rule you should not have more than one tool hooking at kernel level realtime... this is more a OS limit than SS, ZA or whatever security tool limit.Of course, it may work is some cases.. but the trouble is not worth the effort.Cheers,Fax

    Click here for ZA Support
    Monday-Saturday 6am to 10pm Central time
    Closed Sundays and Holidays

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •