Results 1 to 2 of 2

Thread: Uninstall problems

  1. #1
    chall Guest

    Default Uninstall problems

    I've got some issues here, I've got the free zonealarm firewall (havent updated it in a while) but a while ago I got blue screens in startup so I removed zonealarm from the msconfig. Anyway, when I try to use IRC or other programms it still says blocked by zonealarm security. Then I tried booting zonealarm and shutting it down, but each time I tried to shut it down, my pc froze and i had to reboot using the soft switch. Same goes for when I try to uninstall, can't uninstall from the windows add/remove programs nor can I remove it with the uninstaller itself. On other forums it says, shut down the true vector service but I can't, not even when I login on my pc as an administrator, it says access denied =/.

    Any help would be nice
    Thanks in advance

  2. #2
    Join Date
    Nov 2004
    Location
    localhost
    Posts
    17,284

    Default Re: Uninstall problems

    Hi!you need to remove ZA manuallyin SAFE MODE.01.) Restart your computer
    02.) When you see the screen go black and it starts booting back up keep
    tapping the "F8" key (at the top of your keyboard)
    03.) This should bring up a menu. Choose Safe Mode off the menu by
    using the arrow keys on the keyboard to highlight Safe Mode and press
    Enter
    04.) If you get a message asking to go to Safe Mode, choose Yes. If you
    get a help and support window, close this.
    05.) Once you are at the desktop, Click Start, My Computer
    06.) Click Tools, Folder Options, View Tab
    07.) Place a dot next to "Show Hidden Files and Folders"
    08.) Remove the check from "Hide Protected Operating System Files
    (Recommended)"
    09.) Choose Yes to the warning
    10.) Click OK
    11.) Double click C:

    Note: In the future steps if you do not see any files or folders, please click
    the "Show Files" link to view them.

    12.) Double Click the Program Files Folder
    13.) Right Click the Zone Labs Folder, click Delete, and choose Yes

    NOTE: If you cannot delete the entire folder, please open the Zone Labs -
    > ZoneAlarm folder and delete out as many of the files listed here as
    possible.

    14.) Close this window
    15.) Click Start, My Computer
    16.) Double Click the C:
    17.) Double Click the Windows Folder (It may also be WinNT)
    18.) Right Click the Internet Logs Folder, click Delete, and choose Yes
    19.) Double Click the System32 Folder
    20.) Right Click the Zone Labs Folder, click Delete, and choose Yes

    NOTE: If you cannot delete the entire folder, please open the Zone Labs
    folder and delete out as many of the files listed here as possible.

    21.) Locate and delete the following files in the System32 folder if they are
    present:

    - vsconfig.xml
    - vsxml.dll
    - vsregexp.dll
    - vsdata.dll
    - vsdata95.vxd
    - vsdatant.sys
    - vsmonapi.dll
    - vspubapi.dll
    - vsinit.dll
    - vsutil.dll
    - vswmi.dll
    - zlcommdb.dll
    - zlcomm.dll
    - z llictbl.dat
    - zpeng24.dll

    22.) Clear your Temp Directory per the instructions below.

    - Go to Start -> Run
    - Type %temp% and click OK
    - Select all of these files and delete them

    23.) Clear the Prefetch folder per the instructions below.

    - Go to Start -> Run
    - Type Prefetch and click OK
    - Select all of these files and delete them

    24.) Remove the following registry entries by going to Start -> Run and
    typing in regedit. Use the folders on the left side of the window to navigate
    to the specified directories.

    HKEY_LOCAL_MACHINE\Software\Zone Labs
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\vsmon
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\vsdatant

    *Important Advisory: Deleting registry entries incorrectly may cause
    serious problems to your operating system, which may necessitate the
    need to reinstall it. Please make sure you are able to perform these
    deletions correctly before you decide to edit the entries. If you are not
    sure, you should seek help from someone who is familiar with editing the
    registry.

    For information about how to edit the registry in Windows, from your
    desktop, click Start >> Run >> and type regedit. Click on Help >> Help
    Topics. Under the Contents tab, click Change Keys and Values (this may
    be found under the How to... section).

    Also, you should always make a backup of the registry before editing it.
    You can find this in the same section of the Help files.

    25.) Close this window, then empty your recycle bin.
    26.) Restart the computer.
    Cheers,Fax

    Click here for ZA Support
    Monday-Saturday 6am to 10pm Central time
    Closed Sundays and Holidays

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •