Results 1 to 2 of 2

Thread: Can't upgrade to 8.0 in Vista Ultimate

  1. #1
    thesurfer Guest

    Default Can't upgrade to 8.0 in Vista Ultimate

    Hej,

    I accepted to upgrade to 8.0 on my ZA Suite. It was a disaster. I finally had to remove all of Zone Alarm from my PC. Then I downloaded the latest version from my ZA account and did a clean install. Same problem; True Vector not working.

    How do I get my Zone Alarm to work?

    Operating System:Windows Vista Ultimate
    Software Version:8.0
    Product Name:ZoneAlarm Internet Security Suite

  2. #2
    Join Date
    Jun 2006
    Location
    The 3rd Coast - South Central Texas
    Posts
    10,947

    Default Re: Can't upgrade to 8.0 in Vista Ultimate

    Here is a List of the Most common User problems..a.) The first thing a Hacker, Trojan or Virus tries to do if they infect your computer or gain access to your Computer, thru an Email Attachment or pop-up on a Website or user over-ridding the Security alerts by the firewall, is to shutdown, any Firewall, AV/AS.. That is why some users have problems updating ZoneAlarm or any other security program..vsmon.exe/TrueVector is the first thing that loads when your computer starts to boot up, the ZA tray Icon is just a Icon that loads later in the Boot-up process..and TrueVector /vsmon.exe is the last thing to shutdown when your computer shuts down to insure that your computer is always protected..That is why " if Load ZoneAlarm on startup in not Un-checked" and computer Rebooted, Truevector will stay in Memory and will not be removed during Install or Upgrade, in fact the install may fail because Truevector in an attempt to protect your computer will think that the New Install attempt to install a new version of Truevector may be a Hacker Attempting to shut down Truevector..That is why it is very Important to use the Un-Check "Start ZA on Startup" method so that a New Upgrade Copy of TrueVector/vsmon.exe can be installed..b.) some Computer Users thinkhttp://s118.photobucket.com/albums/o...2/th_1what.gif that if one Firewall and anti-Virus is good, two or three different ones running at the same time must be better? http://s118.photobucket.com/albums/o.../th_1mad-1.gif

    5.)- have you properly un-installed any previous firewall and/or anti-virus?? = this needs to be done - http://forums.zonelabs.org/zonelabs/...message.id=154. Most new pc/laptops come with pre-installed security software, which should be properly un-installed prior to installing any ZoneAlarm firewall product. <HR>

    Just One, Not Two -- Never use two software Firewalls at the same time. Completely uninstall one before installing another. Use the vendor's uninstall utility or if not available, use the Windows XP add/remove software tool in the control panel.<HR>Just One, Not Two -- Never use two anti-virus products at the same time. Completely uninstall one before installing another. Use the vendor's uninstall utility or if not available, use the Windows XP add/remove software tool in the control panel. --------------------------------------------Here is a Full proof method Upgrading ZASS on Vista..Probably the best is to have a full manual remove of ZASS and reinstall.

    Please note that ZASS does not always play nice with many security tools. For example, ad-aware, spybotS&amp;D, spyware doctor, spysweeper. For sure it cannot be installed if you have still another antivirus software or firewall installed or active.

    To troubleshoot ZASS issue is highly recommended to remove all the above and install back (if you really need to) after your ZASS works as it should. If you have not installed any of the above ensure that NO left overs are in the system (they can conflict).

    First re-download the latest ZASS version here:
    http://download.zonelabs.com/bin/fre...ory_vista.html

    Then : Remove your current ZASS from the control panel --&gt; uninstall a program

    Then follow the steps below to ensure NO ZA left over are on your system before reinstalling
    The instruction are for XP, they are basically the same for VISTA (e.g. start --&gt; VISTA search box --&gt; and write the command)

    01.) Restart your computer
    02.) When you see the screen go black and it starts booting back up keep
    tapping the "F8" key (at the top of your keyboard)
    03.) This should bring up a menu. Choose Safe Mode off the menu by
    using the arrow keys on the keyboard to highlight Safe Mode and press
    Enter
    04.) If you get a message asking to go to Safe Mode, choose Yes. If you
    get a help and support window, close this.
    05.) Once you are at the desktop, Click Start, My Computer
    06.) Click Tools, Folder Options, View Tab
    07.) Place a dot next to "Show Hidden Files and Folders"
    08.) Remove the check from "Hide Protected Operating System Files
    (Recommended)"
    09.) Choose Yes to the warning
    10.) Click OK
    11.) Double click C:

    Note: In the future steps if you do not see any files or folders, please click
    the "Show Files" link to view them.

    12.) Double Click the Program Files Folder
    13.) Right Click the Zone Labs Folder, click Delete, and choose Yes

    NOTE: If you cannot delete the entire folder, please open the Zone Labs -
    &gt; ZoneAlarm folder and delete out as many of the files listed here as
    possible.

    14.) Close this window
    15.) Click Start, My Computer
    16.) Double Click the C:
    17.) Double Click the Windows Folder (It may also be WinNT)
    18.) Right Click the Internet Logs Folder, click Delete, and choose Yes
    19.) Double Click the System32 Folder
    20.) Right Click the Zone Labs Folder, click Delete, and choose Yes

    NOTE: If you cannot delete the entire folder, please open the Zone Labs
    folder and delete out as many of the files listed here as possible.

    21.) Locate and delete the following files in the System32 folder if they are
    present:

    - vsconfig.xml
    - vsxml.dll
    - vsregexp.dll
    - vsdata.dll
    - vsdata95.vxd
    - vsdatant.sys
    - vsmonapi.dll
    - vspubapi.dll
    - vsinit.dll
    - vsutil.dll
    - vswmi.dll
    - zlcommdb.dll
    - zlcomm.dll
    - z llictbl.dat
    - zpeng24.dll

    22.) Clear your Temp Directory per the instructions below.

    - Go to Start -&gt; Run
    - Type %temp% and click OK
    - Select all of these files and delete them

    23.) Clear the Prefetch folder per the instructions below.

    - Go to Start -&gt; Run
    - Type Prefetch and click OK
    - Select all of these files and delete them

    24.) Remove the following registry entries by going to Start -&gt; Run and
    typing in regedit. Use the folders on the left side of the window to navigate
    to the specified directories.

    HKEY_LOCAL_MACHINE\Software\Zone Labs
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\vsmon
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\vsdatant

    *Important Advisory: Deleting registry entries incorrectly may cause
    serious problems to your operating system, which may necessitate the
    need to reinstall it. Please make sure you are able to perform these
    deletions correctly before you decide to edit the entries. If you are not
    sure, you should seek help from someone who is familiar with editing the
    registry.

    For information about how to edit the registry in Windows, from your
    desktop, click Start &gt;&gt; Run &gt;&gt; and type regedit. Click on Help &gt;&gt; Help
    Topics. Under the Contents tab, click Change Keys and Values (this may
    be found under the How to... section).

    Also, you should always make a backup of the registry before editing it.
    You can find this in the same section of the Help files.

    25.) Close this window, then empty your recycle bin.
    26.) Restart the computer.
    27.) Now Install the New ZASS , accept the Default Settings and Choose Trusted Zone in the Firewall/Zones Area,the Manually Update AV/AS..Good Luck..---------------------------------------
    My Vista Configuration:

    http://i118.photobucket.com/albums/o...4990GV_sig.jpg
    ----------------------------------------------------------------
    ZoneAlarm Security Suite version:8.0.059.000
    TrueVector version:8.0.059.000
    Driver version:8.0.059.000
    Anti-virus engine version:6.0.2.678
    Anti-virus signature DAT file version:962089379
    Anti-spyware engine version:5.0.202.0
    Anti-spyware signature DAT file version:01.200810.4776
    AntiSpam version:5.0.61.9957
    -----------------------------------------------------------------
    Second Computer Vista Home Premium SP1 (32-Bit)
    ZoneAlarm Pro version:8.0.015.000
    TrueVector version:8.0.015.000
    Driver version:8.0.015.000
    Anti-spyware engine version:5.0.202.0
    Anti-spyware signature DAT file version:01.200810.4776
    A Vast 4.8 Anti-Virus Home Edition
    GeorgeV
    ZoneAlarm® Extreme Security


    Click here for ZA Support
    Monday-Saturday__ 6am to 10pm Central time
    Closed Sundays and Holidays

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •