Results 1 to 4 of 4

Thread: Incomplete install of Zone Alarm Pro on Vista

Hybrid View

  1. #1
    fenian Guest

    Default Incomplete install of Zone Alarm Pro on Vista

    I just upgraded my Zone Alarm Pro to Version 8, and after installation it puts an icon in the taskbar, but not on the desktop. Also, I am unable to open the Zone Alarm from the taskbar icon. I need to put my key in and configure it, but I am unable to do so. I am running Windows Vista 32 bit. Any help is appreciated.

    Operating System:Windows Vista Home Premium
    Software Version:8.0
    Product Name:ZoneAlarm Pro

  2. #2
    Join Date
    Jun 2006
    Location
    The 3rd Coast - South Central Texas
    Posts
    10,465

    Default Re: Incomplete install of Zone Alarm Pro on Vista


    <BLOCKQUOTE><HR>Fenian wrote:
    I just upgraded my Zone Alarm Pro to Version 8, and after installation it puts an icon in the taskbar, but not on the desktop. Also, I am unable to open the Zone Alarm from the taskbar icon. I need to put my key in and configure it, but I am unable to do so. I am running Windows Vista 32 bit. Any help is appreciated.

    Operating System:Windows Vista Home Premium
    Software Version:8.0
    Product Name:ZoneAlarm Pro

    <HR></BLOCKQUOTE>

    http://s118.photobucket.com/albums/o...h_1welcome.gif to the Zone Alarm User Forum..
    This applies to

    All ZoneAlarm products
    Windows Vista

    Summary

    I need to completely remove ZoneAlarm, or there are remnants of
    ZoneAlarm on my system

    Solution

    If possible, first try to uninstall ZoneAlarm normally from your Start -&gt;
    Programs -&gt; ZoneAlarm menu. If this fails, or you want to ensure that all
    ZoneAlarm files were removed from the system properly, continue with the
    steps below.

    Please make sure that you have the latest version downloaded first:

    http://download.zonelabs.com/bin/fre...ory_vista.html


    01.) Restart your computer
    02.) When you see the screen go black and it starts booting back up keep
    tapping the "F8" key (at the top of your keyboard)
    03.) This should bring up a menu. Choose Safe Mode off the menu by
    using the arrow keys on the keyboard to highlight Safe Mode and press
    Enter
    04.) If you get a message asking to go to Safe Mode, choose Yes. If you
    get a help and support window, close this.
    05.) Once you are at the desktop, Click Start, Computer
    06.) Click Tools, Folder Options, View Tab

    NOTE: If you cannot see the menu bar with the Tools menu on it, you have
    to press the Alt-key on the keyboard and the menu bar should then be
    visible.

    07.) Place a dot next to "Show Hidden Files and Folders"
    08.) Remove the check from "Hide Protected Operating System Files
    (Recommended)"
    09.) Choose Yes to the warning
    10.) Click OK
    11.) Double click C:

    Note: In the future steps if you do not see any files or folders, please click
    the "Show Files" link to view them.

    12.) Double Click the Program Files Folder
    13.) Right Click the Zone Labs Folder, click Delete, and choose Yes

    NOTE: If you cannot delete the entire folder, please open the Zone Labs -
    &gt; ZoneAlarm folder and delete out as many of the files listed here as
    possible.

    14.) Close this window
    15.) Click Start, Computer
    16.) Double Click C:
    17.) Double Click the Windows Folder
    18.) Right Click the Internet Logs Folder, click Delete, and choose Yes
    19.) Double Click the System32 Folder
    20.) Right Click the Zone Labs Folder, click Delete, and choose Yes

    NOTE: If you cannot delete the entire folder, please open the Zone Labs
    folder and delete out as many of the files listed here as possible.

    21.) Locate and delete the following files in the System32 folder if they are
    present:

    - vsconfig.xml
    - vsxml.dll
    - vsregexp.dll
    - vsdata.dll
    - vsdata95.vxd
    - vsdatant.sys
    - vsmonapi.dll
    - vspubapi.dll
    - vsinit.dll
    - vsutil.dll
    - vswmi.dll
    - zlcommdb.dll
    - zlcomm.dll
    - zpeng24.dll


    22.) Clear your Temp Directory per the instructions below.

    - Go to Start -&gt; Run
    - Type %temp% and click OK
    - Select all of these files and delete them

    23.) Clear the Prefetch folder per the instructions below.

    - Go to Start -&gt; Run
    - Type Prefetch and click OK
    - Select all of these files and delete them

    NOTE: If you do not have the Run option on the Start menu, you can press
    and hold the Windows logo key and tap the letter R .

    24.) Remove the necessary registry entries:

    *Important Advisory: Deleting registry entries incorrectly may cause
    serious problems to your operating system, which may necessitate the
    need to reinstall it. Please make sure you are able to perform these
    deletions correctly before you decide to edit the entries. If you are not
    sure, you should seek help from someone who is familiar with editing the
    registry.

    For information about how to edit the registry in Windows, from your
    desktop, click Start -&gt; Run -&gt; and type regedit. Click on Help -&gt; Help
    Topics. Under the Contents tab, click Change Keys and Values (this may
    be found under the How to... section).

    Also, you should always make a backup of the registry before editing it.
    You can find this in the same section of the Help files.


    To remove the needed registry entries, go to Start -&gt; Run and type in
    regedit. Choose OK, and use the folders on the left side of the Registry
    Editor window to navigate to the specified directories below. Note that you
    will remove the entire folder specified (eg. Zone Labs, vsmon, vsdatant):

    HKEY_LOCAL_MACHINE\Software\Zone Labs
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\vsmon
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\vsdatant


    25.) Close this window, then empty your recycle bin.
    26.) Restart the computer.
    27.) Try to install the latest version of ZAP again.
    Accept the Default Settings and Choose Trusted Zone..

    Reboot..

    ---------------------------------------
    My Vista Configuration:

    http://i118.photobucket.com/albums/o...4990GV_sig.jpg
    ----------------------------------------------------------------
    ZoneAlarm Security Suite version:8.0.059.000
    TrueVector version:8.0.059.000
    Driver version:8.0.059.000
    Anti-virus engine version:6.0.2.678
    Anti-virus signature DAT file version:963610626
    Anti-spyware engine version:5.0.202.0
    Anti-spyware signature DAT file version:01.200811.4845
    AntiSpam version:5.0.61.9957
    -----------------------------------------------------------------
    Second Computer Vista Home Premium SP1 (32-Bit)
    ZoneAlarm Pro version:8.0.059.000
    TrueVector version:8.0.059.000
    Driver version:8.0.059.000
    Anti-spyware engine version:5.0.202.0
    Anti-spyware signature DAT file version:01.200811.4845
    A Vast 4.8 Anti-Virus Home Edition



    GeorgeV
    ZoneAlarm® Extreme Security


    Click here for ZA Support
    Monday-Saturday__ 6am to 10pm Central time
    Closed Sundays and Holidays

  3. #3
    fenian Guest

    Default Re: Incomplete install of Zone Alarm Pro on Vista

    Great. Thanks so much for your help. It's greatly appreciated. Have a good day.

  4. #4
    Join Date
    Jun 2006
    Location
    The 3rd Coast - South Central Texas
    Posts
    10,465

    Default Re: Incomplete install of Zone Alarm Pro on Vista

    Your Welcome
    GeorgeV
    ZoneAlarm® Extreme Security


    Click here for ZA Support
    Monday-Saturday__ 6am to 10pm Central time
    Closed Sundays and Holidays

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •