Results 1 to 2 of 2

Thread: Network problems

  1. #1
    ravenabcd Guest

    Default Network problems

    Hi all i was not sure where to post this so here goes
    Ive got a home network wich i have put in trusted zone the main reason for the network is internet connection shairingbut as soon as i load zonealarm security suit none of the other computers can access the net anyone help me please

    Operating System:Windows XP Pro
    Product Name:ZoneAlarm Internet Security Suite
    Software Version:5.5

  2. #2
    billc Guest

    Default Re: Network problems

    If your ICS works OK without ZASS running, then go over this checklist to see if your settings are correct. Also make certain you have the correct IP's in the ZASS Zones panel for the computers sharing the connection.

    ICS Settings:
    .................................................. ................................................
    On the gateway machine, do the following.
    Click start -> run, type cmd and click ok.
    Type ipconfig /all and press enter.
    Find the connection you are using, and make note of all the DNS servers.
    Type exit and press enter.

    Double-click the ZA icon down by the clock.
    Click firewall -> main, and click the advanced button.
    Put the check in "this computer is an ICS/NAT gateway" , and click ok.
    Click firewall -> zones.

    Add each DNS server to the trusted zone. To do this, do the following.
    Click the add button, and then click IP address.
    Click trusted, put in the IP address, enter a description, and click ok.
    When finished adding all addresses, click the apply button.

    Next, click program control -> programs. Locate Generic Host Processing.
    Under the server column, for trusted, change that to a check.
    Don't change server internet to a check, just server trusted.

    If you have ZoneAlarm on the other computers, do the following.
    Click the ZA icon down by the clock.
    Click firewall -> main, and click the advanced button.
    Put the check in "this computer is a client of an ICS/NAT gateway" , and click ok.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •