Results 1 to 4 of 4

Thread: No Access to Device Manager + USB Pen Problem

Hybrid View

  1. #1
    rubiance Guest

    Default No Access to Device Manager + USB Pen Problem

    I have just started using ZoneAlarm Pro after
    Sygate was swallowed up by Norton. However I have experienced the following problems
    When Zone Alarm is running I cannot gain access to the device manager through the usual control panel and system route. When I click on the device manager I get the error "WINDOWS CANNOT ACCESS THE SPECIFIED PATH, YOU MAY NOT HAVE PERMISSIONS TO ACCESS THE ITEM"
    If I shut ZA down it works as normal.
    If I plug my USB pen drive in it all works as normal, when I go to safely remove the hardware no USB devices are shown in the box, again if I shut ZoneAlarm down all if fine.
    I therefore have to shut down ZA to remove my USB device.
    Any help or comments would be gratefully received.


    Operating System:Windows XP Pro
    Product Name:ZoneAlarm Pro
    Software Version:6.0

  2. #2

    Default Re: No Access to Device Manager + USB Pen Problem



    Sounds like a program control problem in Zonealarm.

    Open the Zonealarm control panel and go to Program Control> Main and slide the program control lever to low. If Your programs run properly now you can either keep program contrrol
    setting at low or return it to medium (the default setting) and adjust the settings for the individual programs on the programs list. For more details check the Zonealarm manual under Program Control

  3. #3
    rubiance Guest

    Default Re: No Access to Device Manager + USB Pen Problem

    Ledoc
    Many thanks for your help,
    you're 100% correct. I altered the slider from medium to low and all my problems are solved.
    Thanks again
    :8}
    Rubiance

    Message Edited by rubiance on 02-25-200611:08 AM

    Operating System:Windows XP Pro
    Product Name:ZoneAlarm Pro
    Software Version:6.0

  4. #4

    Default Re: No Access to Device Manager + USB Pen Problem

    Happy to help

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •