Results 1 to 3 of 3

Thread: How Do I Enter DYNAMIC IP in Trusted Zone

  1. #1
    richie72846 Guest

    Default How Do I Enter DYNAMIC IP in Trusted Zone

    I use to use only static ip addresses in the trusted zone firewall. I have switched to dynamic ip addresses, so how what do I put in for the ip address since dynamic addresses can chnage from day to day ?

    Richie

  2. #2
    Join Date
    Aug 2009
    Location
    Texas Gulf Coast
    Posts
    1,648

    Default Re: How Do I Enter DYNAMIC IP in Trusted Zone

    Very useful information here :

    http://zonealarm.donhoover.net/dnsdhcp.html

    Or type ipconfig /all in Search

    Under Firewall / Zones at bottom right click Add, then select IP address from the shortcut menu.While in this panel you can also click Help and select " About This Panel "

    I have no other suggestion other than this to resolve your issue.

    Hope this helps.

    Have a nice Day
    Last edited by Sky Soldiers; August 20th, 2009 at 06:23 AM. Reason: Correction

  3. #3
    dancing_noodles Guest

    Default Re: How Do I Enter DYNAMIC IP in Trusted Zone

    If your using a DHCP server to allocate I P addresses you have already defined a DHCP Scope i.e. defined which I P addresses the Server can allocate.

    You need to add this scope to your Zonealarm firewall you can do this by adding a complete network i.e. 192.168.1.0 255.255.255.0 or add it as a range of addresses i.e 192.168.1.1 to 192.168.1.10

    Regards

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •