Results 1 to 3 of 3

Thread: New network error

  1. #1
    GadgetDude Guest

    Default New network error

    My system is Windows 7 Professional 64-Bit with a Linksys Wireless Router, WRT350N.

    PLEASE HELP!
    Each time my computer boots, ZA Extreme Security issues a "New Network" alert, indicating a "Private Network".
    In researching this, I found the following information:

    "192.168.1.0
    Definition: The IP address 192.168.1.0 represents the 192.168.1.x range of addresses where x is between 1 and 255. 192.168.1.0 is a private IP network. It is the default network (but not the default address) for Linksys brand home broadband routers.
    192.168.1.0 is not a valid IP address for a network router or other host, and no device on your network should be configured to own this address. Instead, 192.168.1.0 is used in routing tables and by the Internet Protocol internally to identify the 192.168.1.x network as a whole. A router or other network gateway device on these networks is typically installed at 192.168.1.1, and other hosts use higher numbers in the range."

    How do I stop ZA from displaying this alert every time I boot up? I know it has something to do between ZA and my Linksys router.
    Thank You.

    GadgetDude

  2. #2
    Rob938 Guest

    Default Re: New network error

    Try to rename the new network found.
    Go to firewal and go to zones, then rename the new network to any name!
    This did it for me, no pop ups any more!

    Gr..

  3. #3
    zaswing Guest

    Default Re: New network error

    On the firewall zones tab enter the network 192.168.1.0/255.255.255.0 as trusted. You can call it "My LAN" or anything you please.

    Easier way, ALLOW it when the alert comes up, it should get entered as trusted all by itself.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. deleting local network allowed possibly by error
    By jcchev in forum Security Issues
    Replies: 4
    Last Post: February 15th, 2008, 04:31 AM
  2. Wireless drops out ."Aquiring network address" in network status window.
    By rossco in forum General - Questions that don't fit any other category
    Replies: 1
    Last Post: April 15th, 2006, 05:26 PM
  3. Replies: 1
    Last Post: April 13th, 2006, 10:57 PM
  4. "New Network Found" error messages
    By daver_jr in forum Windows and ZoneAlarm Messages and Alerts
    Replies: 1
    Last Post: February 4th, 2006, 12:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •