Results 1 to 4 of 4

Thread: ZA and Cisco VPN client

Hybrid View

  1. #1

    Cool ZA and Cisco VPN client

    Hi,

    I'm using ZASS 10.2.074.000. To connect to my VPN server, I use the Cisco Client 5.0.07.440.

    It worked fine with another computer (other ZASS). In this computer (Win7) the Cisco client is never able to make a connection unless I turn ZASS off. Once the connection is established, I may turn ZASS on again.

    The Ciswo lient sues port 10000 for TCP/IP and 4500 for UDP. I opened both ports but to no avail... I also made a rule (opening ports 4500 and 10000).

    Any suggestion(s) ?

  2. #2
    Join Date
    Jun 2006
    Location
    The 3rd Coast - South Central Texas
    Posts
    10,465

    Default Re: ZA and Cisco VPN client

    Hello;

    Please Read this post near the TOP of the ZoneAlarm Configuration section for a possible sollution..

    Sticky: [WORKAROUND] Cisco VPN / ZASS 10.0.250. conflict --> Install another VPN or ZA 9 <= click here

    Also Unpdate ZASS 10.2.074.000 to version 10.2.081.000
    http://www.zonealarm.com/security/en...download-b.htm <== click here
    Last edited by GeorgeV; November 4th, 2012 at 02:26 PM.

  3. #3

    Default Re: ZA and Cisco VPN client

    Hi,

    Thank you for your answer. I did upgraded to version 10.5.081.000 and it helped a little bit. I still need to exit ZA before my Cisco client would connect. When the connection is made as UDP (port 4500), I can reload ZASS and the VPN connection will be maintained. I can also disconnect and reconnect if using the UDP connection. This will not work if using the TCP/IP connection (port 10000).


    So, its is better than nothing but not a real solution.

    I checked the other VPN client recommended in the link you gave: Sticky: [WORKAROUND] Cisco VPN / ZASS 10.0.250. conflict --> Install another VPN or ZA 9 <= click here ..., but tis this not work because I could never find how to configure this client to be compatible with the VPN server I need to connect to.

  4. #4
    Join Date
    Jun 2006
    Location
    The 3rd Coast - South Central Texas
    Posts
    10,465

    Smile Re: ZA and Cisco VPN client

    Thank you for your feedback..


    Have you checked the Cisco Support Site for a possible solution, or notified Cisco about the conflict between the Cisco VPN client and Zone Alarm?

    NOTE: Cisco and many other Software companies depend on Customers of their products providing Feedback to them about any conflict or issue with their products..
    Last edited by GeorgeV; October 21st, 2012 at 06:56 AM.
    GeorgeV
    ZoneAlarm® Extreme Security


    Click here for ZA Support
    Monday-Saturday__ 6am to 10pm Central time
    Closed Sundays and Holidays

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: June 22nd, 2012, 10:06 AM
  2. ZASS 7.0 with Cisco VPN Client 5.0
    By mlagrange in forum Access Issues
    Replies: 5
    Last Post: July 2nd, 2008, 07:11 PM
  3. Cisco VPN Client incompatibilities
    By rdepina in forum ZoneAlarm Installation
    Replies: 1
    Last Post: December 3rd, 2007, 09:32 AM
  4. Replies: 5
    Last Post: November 2nd, 2007, 02:25 AM
  5. ZA Security Suite VS Cisco VPN CLient
    By ruprect in forum Windows and ZoneAlarm Messages and Alerts
    Replies: 1
    Last Post: January 29th, 2006, 05:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •